Influences of Gasification Temperature and Equivalence Ratio on Fluidized Bed Gasification of Raw and Torrefied Wood Wastes
Jamin, Nur Ashikin
Saleh, Suriyati
Abdul Samad, Noor Asma Fazli
Download PDF

How to Cite

Jamin N.A., Saleh S., Abdul Samad N.A.F., 2020, Influences of Gasification Temperature and Equivalence Ratio on Fluidized Bed Gasification of Raw and Torrefied Wood Wastes, Chemical Engineering Transactions, 80, 127-132.
Download PDF

Abstract

Gasification of raw and torrefied wood wastes from municipal solid waste (MSW) were investigated in fluidized bed gasifier using air as gasifying agent. The effect of gasification temperature from 600 and 1000°C and the effect of equivalence ratio (ER) from 0.21 to 0.37 on syngas composition and gasification performance were studied. Based on gasification experimental results, the suitable operating condition of fluidized bed gasification is found at gasification temperature of 1000°C and ER of 0.21. At this condition highest high heating value (HHV) of 5.78 and 5.71 MJ/Nm3, syngas yield of 2.77 and 2.57 Nm3/hr, cold gas efficiency (CGE) of 70.66% and 76.24%, carbon conversion (CC) of 77.17% and 77.83% were obtained for torrefied and raw wood wastes respectively. In terms of feedstocks, torrefied wood waste produces higher syngas yield and HHV compare to raw wood waste due to the presence more carbon content in the torrefied wood waste which ultimately produces more hydrogen and carbon dioxide gases. However higher CGE and CC are obtained for raw wood waste compare to torrefied wood waste indicating torrefied wood waste needs a longer conversion process compared to raw wood waste.
Download PDF