TY - JOUR AU - Flagiello, Domenico AU - Di Natale, Francesco AU - Erto, Alessandro AU - Lancia, Amedeo PY - 2021/06/15 Y2 - 2024/03/28 TI - Oxidative Scrubber for NOx Emission Control Using NaClO2 Aqueous Solutions JF - Chemical Engineering Transactions VL - 86 SP - 397-402 SE - Research Articles DO - 10.3303/CET2186067 UR - https://www.cetjournal.it/index.php/cet/article/view/CET2186067 AB - Oxidative scrubbing using different oxidizing chemicals (e.g. sodium chlorite, NaClO2) has been proposed since several years for gas emissions control. Although higher performances than conventional after-treatment process currently in use can be reached, these technologies have not yet found a consolidated application in the power generation and other industrial fields, due to excessive chemical consumption and the formation of some harmful contaminants in the wash water that must be removed with specific treatment systems.This work reports an experimental investigation of an oxidative wet scrubber for NOx removal from a simulated flue-gas containing 1030 ppmv of nitrogen oxides, using a scrubbing liquid doped with sodium chlorite (NaClO2) as oxidizing chemical. The experiments are performed in a packed column operating in counter-current flow with a constant gas velocity of 1.15 m/s at 60 °C and a liquid-to-gas ratio variable from 1.25 to 4.06 L/m3. The packed column with a DN 100 is equipped with 892 mm of Mellapak 250.X packing.The experimental removal efficiencies of NOx are evaluated in function of the liquid flow rate and NaClO2 loading. These data allow to determine the specific NaClO2 dosage required to achieve a fixed NOx removal. Finally, a predictive correlation for wet oxidative scrubbing is also developed. ER -