Hydrogen Evolution Using Aluminum Alloys and Saline Waste Water
Elyas, Maria
Ashour, Fatma
Gadalla, Mamdouh
Khalil, Nisrin A.
Deyab, Mohamed A.
Pdf

How to Cite

Elyas M., Ashour F., Gadalla M., Khalil N.A., Deyab M.A., 2025, Hydrogen Evolution Using Aluminum Alloys and Saline Waste Water, Chemical Engineering Transactions, 119, 37-42.
Pdf

Abstract

Hydrogen will be a valid substitute for fossil fuels in various applications and a promising energy vector/carrier, in the context of the transition towards a low-carbon economy because of its advantage of being a clean energy source. Hydrogen will open up new approaches for decarbonization. Current methods of producing hydrogen, such as electrolysis, can be expensive due to the energy-intensive processes involved. The study is divided into three major parts. The first is the design and development of an innovative and effective method for producing hydrogen via electrochemical interactions between aluminum alloys and salt water (SW). During the second phase, we employed ionic liquid (FIL) to limit hydrogen production for specific applications, particularly in contexts where controlled hydrogen generation is advantageous. To measure the amount of hydrogen generated, we built a setup and measured it as it was produced. Then, after adding the produced FIL, we observed that it acts as an inhibitor, delaying hydrogen generation. The hydrogen gas evolved rate (HR) in our first experiment, without the FIL, was HR=0.873 ml/(min cm2), however when the FIL was added at a concentration of 1.2 mM, we observed a reduction in hydrogen creation with a hydrogen gas evolved rate of HR=0.098 ml/(min cm2). The third stage of our study is a risk assessment for hydrogen production.
Pdf